Jay-Pee High Gloss Honor Guard Duty Rig Bundle – Complete Law Enforcement Ceremonial Setup

Represent your agency with professionalism and pride using the Jay-Pee High Gloss Honor Guard Duty Rig Bundle. Designed specifically for law enforcement honor guard personnel, this complete ceremonial setup provides the polished appearance required for funerals, memorial services, Police Week events, academy graduations, parades, inspections, and other formal ceremonies.

Manufactured in the USA by Jay-Pee, this premium bundle features a high-gloss Clarino finish and includes the essential components needed to create a coordinated ceremonial uniform appearance.

What's Included

• High Gloss Sam Browne Duty Belt
• High Gloss Shoulder Strap with D-Rings
• High Gloss Flap Holster
• High Gloss Magazine Pouch
• High Gloss Handcuff Case
• Choice of Brass, Chrome, or Black Hardware
• Premium Clarino High Gloss Finish
• Made in the USA

Built for Law Enforcement Honor Guards

Unlike standard patrol equipment, ceremonial duty gear must project a sharp, professional appearance while maintaining the traditional look expected of law enforcement personnel. The Jay-Pee High Gloss Honor Guard Duty Rig Bundle provides a complete matching setup suitable for:

• Police Department Honor Guards
• Sheriff's Office Honor Guards
• State Police Honor Guards
• Federal Law Enforcement Honor Guards
• Corrections Honor Guards
• Public Safety Ceremonial Units
• Ideal for Ceremonial Events

This honor guard bundle is commonly used for

• Officer Funerals
• Memorial Services
• Police Week Events
• Academy Graduations
• Award Ceremonies
• Promotional Ceremonies
• Community Parades
• Formal Agency Functions
• Honor Guard Details
• Premium American-Made Quality

Jay-Pee ceremonial gear has earned the trust of law enforcement agencies throughout the United States. Each component is manufactured using premium materials and designed to provide years of dependable service while maintaining a professional ceremonial appearance.

Whether participating in a funeral detail, memorial service, parade, or formal ceremony, the Jay-Pee High Gloss Honor Guard Duty Rig Bundle helps ensure your agency is represented with the dignity and professionalism these occasions deserve.

This belt is made to your specifically to your size and draw side request.  The order is sent to the manufacturer for production soon after placing your order.  Once the item goes to the manufacturer, there are no cancellations or changes.  This item also carries a restocking fee if you wish to return or exchange.

Strap Sizing:

Please refer to the photo for strap sizing.  In order to get the correct size shoulder strap, please put on your current duty belt and measure from the top of the belt in front, over the shoulder, to top of the belt in the back on the opposite side.  Select that measurement and the correct strap size will be sent. 

Important Belt Sizing Information:

You are most likely not the same size today as you were when you bought your last belt. Please actually measure yourself with your pants and inner belt on BEFORE ordering.

Do not buy the same size as your pants size. You must account for your pants and your inner belt when buying a duty belt. Buy a size larger than your inner belt and at least two sizes larger than your pant size.

If you are confused by these instructions.. please ask BEFORE ordering.

When ordering your Sam Browne belt, order a belt that is at least 6 inches larger than your pant size. This duty belt will fit over your regular belt.

DO NOT buy a belt that is your waist size OR your pants size!!!

For the best belt buying experience, you can do two things to get an accurate measurement.

1. Use an Existing Belt

Go get a belt that fits well

• Generally, a belt fits you well when you can easily buckle it using the middle hole in the belt
• If you have to use the first hole, you'll have a lot of extra at the end of the belt
• If you're using the holes at the end, the belt is a little too small and the end of the belt might not make it all the way to the belt loop on your pants.

Spread the belt out flat

• Put the belt on a flat surface like a table or on the floor. Lay it down so that the belt is completely flat and doesn’t have any bumps sticking out
• Make sure the belt is fully extended and doesn’t have any slack
• If the belt doesn’t want to stay flat (because of overuse, for example), you can place a heavy object on both ends of the belt to keep it stationary

Measure the belt

• Grab a retractable measuring tape or a fabric measuring tape
• Measure from the base of the buckle prong to the center hole
• If you don’t use the center hole, measure from the base of the buckle prong to the hole you use the most
• This number will probably range between 30 inches (76.2 cm) and 60 inches (152.4 cm), depending on your waist size
• If between sizes, round UP

2. Actually Measure Yourself

Got get a fabric measuring tape

• Fabric measuring tapes have the most flexibility and work best

Put on a pair of well fitting pants

• Make sure your pants fit snugly
• If your pants are too loose, the extra material will cause inaccurate measurement and belt that is too big
• If your pants are too tight, your belt will be too small

Get Measured

• Have someone help you
• Stand normally and breath normally
• Put the measuring tape around yourself where you the belt would set on your pants
• Note the number in inches where tape measure end meets
• If between sizes, round UP

Belt buying Tips

• Do not buy a belt that is your waist size (go at least 6 inches larger)
• Do not buy a belt that is your pants size (go at least 4 inches larger)
• Do not buy a belt that is your regular pant belt size (go at least 2 inches larger)
• Do not buy a belt the same size that is labeled on your current belt (different manufacturers use different measuring methods)
• Do not assume you know your size already (you have probably eaten more twinkies than you realize)
• Do measure yourself
• Do follow the sizing information above
• Do measure yourself
• Do measure yourself